How it works
This project is K.I.T.T. scanner lights controller.
| Pin |
Name |
I/O |
Descrption |
| ui[0] |
ENA |
I |
enable |
| ui[2:1] |
MODE[1:0] |
I |
mode |
| ui[3] |
SPEED |
I |
speed select |
| ui[4] |
OINV |
I |
inverse mode |
| ui[5] |
OSEL |
I |
out select |
| uo[7:0] |
LEDOUT[7:0] |
O |
LED K or A |
| uio[7:0] |
monitor[7:0] |
O |
test monitor |
How to test
- Initial ENA = L.
- Set MODE, SPEED, OINV and OSEL to select operation mode.
- ENA = H to activate.
- LEDs are controlled.
- ENA = L to de-activate
SPEED
| SPEED |
Description |
| 0 |
Normal speed |
| 1 |
1.5x speed |
MODE
| MODE[1:0] |
Description |
| 0 |
Normal mode |
| 1 |
Mode 1 |
| 2 |
Mode 2 |
| 3 |
Mode 3 |
OINV
出力レベル反転設定
| OINV |
Description |
| 0 |
A-common mode |
| 1 |
K-common mode |
OSEL
| OSEL |
Description |
| 0 |
Non-dimming mode |
| 1 |
Dimming mode |
External hardware
- 8 LEDs for K.I.T.T. scanner lights
- Switches for mode configuration and a start trigger
